Home Mix The technical specifications of the Homemix Mix-1 are: Input channels: 2 Stereo. Trim/gain controls: Both input channels + Microphone input. Cue: Both input channels. Line inputs: 4x cinch. Phono inputs: 4x cinch, 2x grounding lug. Phono in shorting required: Yes; shorting pins provided. Microphone inputs: 1x 6.35mm jack, talkover only. Bus outputs: 2x cinch line level, 1x 6.35mm stereo headphone jack. Bus metering: 2x 5 bar LED. Crossfader: Replaceable 45mm. Power connector: External wall wart, 9v AC. Size: 16.5 x 8.2 x20 cm (Width x Height x Depth). Weight: 1.6 Kg. The technical specifications of the Homemix Mix-2 are: Input channels: 2 Stereo. Trim/gain controls: Both input channels + Microphone input. Cue: Both input channels. Line inputs: 4x cinch. Line input sensitivity: -14dB @ 12kohms +/-3dB . Line stage frequency response: 20Hz ~ 20kHz +2dB/-3dB. Line stage noise spec: Less than -75dB. Phono inputs: 4x cinch, 2x grounding lug. Phono input sensitivity: -50dB @ 47kohms +/-3dB . Phono stage frequency response: 20Hz ~ 20kHz +2dB/-3dB (devir. RIAA). Phono stage noise spec: Less than -65dB. Phono in shorting required: Yes; shorting pins provided. Microphone inputs: 1x 6.35mm jack, talkover only. Microphone input sensitivity: -54dB @ 3kohms +/-3dB . Mic stage frequency response: 20Hz ~ 20kHz +2dB/-3dB. Mic stage noise spec: Less than -55dB. Bus outputs: 2x cinch line level 0dB @ 47kohms +/-3dB, 1x 6.35mm stereo headphone jack, -3dB @ 33kohms +/-3dB. Line output spec: >18dB(8v) @ 47kohm load, THD=5%. Line output total harmonic distortion: Better than 3%. Headphone output spec: >5dB(1.8v) @ 32ohm load, THD=5%. Headphone output total harmonic distortion: Better than 0.3%. Output channel balance: Better than 3dB. Low Eq: +15/-22db @ 70Hz (+/-3dB). High Eq: +15/-19dB 13kHz (+/-3db). Crossfader: Replaceable 45mm. Power connector: External wall wart, 9v AC. Size: 23.6 x 8.2 x 19.2 cm (Width x Height x Depth). Weight: 2.8 Kg. |
|